How to Open a Wine Bottle Without a Corkscrew
Do you wish to know how to open a wine bottle without a corkscrew? Here is your chance. You can do this in different ways, and I will be showing how you can go about it as you read through it.
How to Open a Wine Bottle Without a Corkscrew

Everyone who drinks wine has been there. You are ready to open that bottle of wine, but you don’t have a corkscrew! In most circumstances, purchasing a new corkscrew would be the best solution, but here are four tactics to open wine bottles in a hurry.
1. Force the Cork Out With Heat
You may have noticed servers employing a specific instrument to open wine bottles called Tenaz do Porto or Port Tongs.
The tongs can be heated above a fire and then used to bust open a wine bottle (literally) underneath the cork. This is typically done with older bottles of wine that tend to deteriorate near the cork.
You should employ a similar procedure to cleanly open any bottle, new or old. Start a lighter at the base of the corkscrew to generate heat within the bottle.
That heat should force the air particles to expand, gradually pushing the cork out of the bottle. While using a lighter is a safe technique to open wine bottles, I recommend doing it outside with the bottle top facing slightly away from your body to avoid harm.
2. Push the Cork into the Bottle
Take a screwdriver or anything similarly sturdy and narrow. Then, use a hammer to simply beat the cork in.
I urged you to avoid accidentally tapping the glass container itself. Just carefully pound a blunt object onto the cork. You should also be prepared for possible splashing owing to the pressure.
3. Hit the Bottle on a Hard Surface
When particularly desperate, Insert the base of a wine bottle into the opening of a shoe. Then, using the bottle, knock the heel of the shoe on a hard surface.
You should do this several times until the upward pressure sends the cork flying. If you are courageous enough to try this procedure, make sure your bottle is thick and durable before proceeding.
You should only try this outside because the potential for a mess is high.
4. Bend or Break off the Outer Prongs of a Fork
Have you ever tried to open a cork-sealed bottle with a knife? It’s typically tough to twist and raise the cork with that single, slick blade.
If you have an extra fork, bend the exterior prongs upward or break them totally off. Insert the center prongs into the cork, twisting and lifting.
This is considerably more effective than a knife and can save you from having to dig out the cork from the bottle.
RELATED!!!